Oil Mill Machinery

Product description:

• Two chamber design - pre pressing & full pressing in single stage crushing for better oil recovery & profitable operation
• Heavy duty cylindrical roller, thrust, taper roller and ball bearing are used
• All the parts have male and female seating to get the perfect alignment
• All shaftings are made from EN Alloy steel which means no wear and tear, no twisting
• High yield at low cost
• Easy smooth operation with less power consumption compared to other expellers
• Steam jacket is made from tested quality plates to uphold the steams and is provided with
• Long and horizontal types
• All gears are manufactured from carbon steel and are hardened to the require degree
• They Machined to fine tolerances for proper meshing of the gears
• Easy replacement of spare parts
• Best desirable results in cake & smell
• Available in various sizes for various need

We have gained expertise in offering a quality approved range of Huller Shaker. Offered range of product is tested for its quality under the supervision of highly experienced and skilled quality experts before introducing in the market. Moreover, our clients can avail these products at reasonable market price from us.

Features:

• Sturdy construction
• Durable finish standards
• Low maintenance

• The Perfection huller represents the best all round design for cutting cotton seed and other Oil bearing seeds
• The Machine consists of a rotation cylinder carrying 17 rows of knives passing concave holding rows of stationary knives
• The latest design designated as the “Central Concave Model “embodies changes per feting

• The concave is pivoted on fixed points and remains in perfect alignment with the cylinder. The only adjustment on huller is the eccentric shaft on the concave.
• This adjusts the stationary knives to and forms the rotating knives on the cylinder.
• The position of the stationary knives and the pivot point of the concave are such as the make the huller very sensitive to foreign matter
• If a piece of foreign material enters the huller large enough to cause damage the safety studs holding the concave in position are immediately broken, allowing the concave to fall open and be held by stop chain
• The Cylinder is carried in extra heavy ball bearing boxes located outside the body of the machine
• The cylinder is dynamically balanced to run free form vibration
• The perfection huller knife is rectangular in section
• By reversing the knife and turning it over at intervals all four edges can be used for cuttings. The Combination of MITSUN Perfection Huller Mounted on MITSUN Shaker Separator will reduce absorption loss to a minimum
• This is due to the clean cutting action of the huller and the efficient separation of meats and hulls by the shaker

• All bodies, gear boxes and bearing housings are made of high grade cast iron and cast steel,
• Two chamber design - pre pressing & full pressing in single stage crushing for better oil recovery & profitable operation
• Heavy duty cylindrical roller, thrust, taper roller and ball bearing are used.
• All the parts have male and female seating to get the perfect alignment.
• All shafting are made from EN Alloy steel which means no wear and tear, no twisting.
• High yield at low cost.
• Easy smooth operation with less power consumption compared to other expellers.
• Steam jacket is made from tested quality plates to uphold the steams and is provided with
• Long and horizontal types.
• All gears are prepared from carbon steel and are hardened to the require degree.
• They Machined to fine tolerances for proper meshing of the gears.
• Easy replacement of spare parts.
• Best desirable results in cake & smell.
• Available in various sizes for various needs.
• Technologically advanced infrastructure.

• All bodies, gear boxes and bearing housings are made of high grade cast iron and cast steel,
• Two chamber design - pre pressing & full pressing in single stage crushing for better oil recovery & profitable operation
• Heavy duty cylindrical roller, thrust, taper roller and ball bearing are used.
• All the parts have male and female seating to get the perfect alignment.
• All shafting are made from EN Alloy steel which means no wear and tear, no twisting.
• High yield at low cost.
• Easy smooth operation with less power consumption compared to other expellers.
• Steam jacket is made from tested quality plates to uphold the steams and is provided with
• Long and horizontal types.
• All gears are prepared from carbon steel and are hardened to the require degree.
• They Machined to fine tolerances for proper meshing of the gears.
• Easy replacement of spare parts.
• Best desirable results in cake & smell.
• Available in various sizes for various needs.
• Technologically advanced infrastructure.

• Damage resistance
• Long service life
• High performance